Simple Ideas For Toilet Repair
Do you know how to do toilet repair?Many may not realize that the toilet is actually one of the most important fixtures in your business or home.
Most of them are sturdy and consistent fixtures in the plumbing system. However, renters, business owners and homeowners all faced some issues or problems with the toilet. Stoppage or clogging is typically the most frequent toilet repair issue. There can be several other issues that arise too; many are minor in nature, whereas some can actually require a full replacement of the unit.
The tank makes many strange and unique noises, or water constantly runs. Handles get stuck, seat bolts get stripped causing the seat to shift and stoppers in the tank get lodged to where the tank does not refill properly. These toilet troubles can usually be repaired without the help from a professional plumber. If you are a fix it type of person, then you can do these repairs by yourself and save money.
For toilets that sometimes flushes or refills itself, you may have several options to look into. The flapper valve may need checked to be sure it is sealing properly. Sometimes you may need to monitor the bolts on the tank to be sure they are not leaking. It always helps to also look at the connection to your water line. By doing this you can check for leaks. Another option is to look at the gasket of the tank for any cracking.
If you hear running water, then there are similar as well as separate issues to check out. The overflow tube in the tank should be inspected. The tank float may be defective or need replaced. You could also inspect or replace the tank valve and be sure to inspect the flapper valve too.These are all very quick and easy ways to monitor your toilet. It takes but a few minutes to perform and even in the event you need to replace a part, it is pretty easy and affordable.
A very common toilet repair problem for many people is the annoying need to jiggle the handle in order for water in the tank to fill up, or stop running. This is an easy fix. Begin by checking the linkage that connects the handle to the flapper. Also, again, check the flapper valve. In this case, you may also need to look at the float that is in the tank too. Any of these issues can prevent the tank from filling properly.
If the unit just will not stop flushing or filling, then consider lowering the water fill level in the tank. It could be as simple as that, too much water in the tank area. It could also be that the flapper itself is lodged or stuck in the open position. If this is the case then knock the flapper down and you have fixed the problem. Check the fill valve and tank float too and see if they need attention.
If the toilet has not experienced an overflow, yet you have water on the floor, and then look into a few things. Look at the connection of the tank and the water valve. There may be a leak or loose connection that can be easily fixed. Look at the tank gasket and bolts to see if they need replaced. There are times as well where you may have to replace the actual toilet wax seal. The wax seal is very inexpensive and easy to replace.
Return Home from Toilet Repair